Recently Updated Pages
Software Design
Code structure COMMANDS: This part specifies the different commands used to transmit the data b...
Hardware Design
The VGA Payload differs from P/L 2 and P/L3 greatly, both in purpose and development. As previous...
Subsystem Description
Document scope This document aims to give insight into the design choices taken in the developme...
System Requirements
Owner Req ID Requirement Text Requirement Note OBC OBC-0010 The OBC shall monitor all spacec...
Mission Requirements
Index Domain Description M-0010 General The satellite will be launched in a LEO orbit corr...
Radiation Protection
Radiation Radiation is a general denomination of all the high-energy particles and electromagneti...
Spacecraft System Configuration
In this page information into the spacecraft's measures is provided. Two diagrams are presented u...
Gyroscope Characterization and Calibration
Test Description and Objectives This test is designed to characterize and calibrate the ADCS gyro...
Functional Architecture
The functional architecture of the spacecraft is defined by the different tasks or functions that...
Magnetorquer Polarisation verification
DOCUMENT SCOPE The aim of this document is to clearly explain the procedure to verify the polaris...
Physical Architecture
The physical architecture of the spacecraft (S/C) is comprised by the different subsystems and co...
Photodiodes Temperature Characterization
Test Description and Objectives The main objective of this test is to characterise the temperatur...
Battery degradation test
Test Description and Objectives The objective of this test is to perform and analyse the degradat...
Battery characterization test
Test Description and Objectives The objective of this test is to perform and analyse a charge cyc...
Satellite Operational Modes
The operational modes for the satellite and its subsystems are: Init: This mode is directly assoc...
Solar cells
Datasheet and 3D model of our Ligtricity s3040_CIC solar cell https://satsearch.co/products/exa-s...
Space Debris Mitigation report
Introduction This report focuses on space debris mitigation for PocketQube satellites as part of ...
Mission Phases
The mission is segmented into five distinct phases: 1) Prelaunch, 2) Launch and Early Orbit Phase...
Data Products
This section will cover the pata products generated by the Lektron mission. Consider these will v...
Data budget
Introduction This document outlines the methodology, assumptions, and calculated results, providi...