Test
RFI-5G FE-Bottom SSV
Test Description and Objectives The objective of this test is to validate the correct operations ...
RFI-5G FE-Top SSV
Document Scope The objective of this document is to detail the procedures, results and conclusion...
K-Band VCO Calibration Procedure
Objective Measure the frequency response of the VCO and characterize it. Steps to follow Turn ...
Front-end Gain calibration Procedure
Objective Measure the total system gain at the output of the RSSI and equalize it. Steps to follo...
K-band Noise floor characterization Procedure
Objective Measure the RSSI obtained though all the 1GHz band with only noise and characterize it....
K-band CW characterization Procedure
Objective Measure the RSSI obtained though all the 1GHz band when inputting a CW and characterize...
P/L3 Envelope Detection characterization Procedure
Objective Characterize the capacity of the RFI Monitoring system to detect signals by Envelope De...
P/L3 Statistical pulsed signal characterization Procedure
Objectives Characterize the capacity of the RFI Monitoring system to detect pulsed signals by sta...